Front High Performance BBK For Audi A4L 18 Inch 4 piston Caliper Brake Kit With 355*28 mm Rotor
1 Full kit included
2 x Calipers
2 x Discs
2 x Brake Lines
4 x Brake Pads
2 x Adapters( Brackets)
Hardwares
Brake Pads
Material: Ceramic Graphite
Heat Resistant:0-500C
Friction Coefficient:0.49
Rotor (Disc+Center Hub)
craft: Forged
Plane Bounce:<0.03mm
Material:
1,Disc:High Carbon Iron
2,Center Hub: Aerial 6061 Aluminum Alloy
ROTOR SPECS:
Two-piece floating rotor with 6061-T6 aerospace grade alloy cap.
It comes out fully balanced
Rotor rings are made of FC30 cast iron with corrosion resistant coating.
Drilling/slotting/drilling and slotting rotor rings are available at no additional cost.
(We recommend drilling in the streets and grooving in the tracks and races)
Curved blade ventilation to achieve the best cooling effect.
The fully floating rotor uses floating hardware (detachable and reconstructable) with anti-knock system.
It provides a lower tendency to warp, less drag and wear because the rotor ring itself is centered with the bearing bush.
Only for 330mm and larger rotors.
Semi-floating rotors are bolted instead, and the rotors are attached to the cap.
Custom anodized rotor cap color.
Brackets/Adapters
Material: Aerial 6061 Aliminum Alloy
Craft: CNC
Brake Hose/Brake line
Material: Inside teflon, Braided Stainless steel mid layer ,Protective outer PVC weather proof shell
Our brake kit is supplied with a Goodridge Style Brake line kit with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance.
WARRANTY:
10 years on calipers casting, caliper parts, and seals.
2 years on mounting hardware and brackets.
Lifetime Warranty on brake lines. DOT approved
10,000km / 3 months on rotors.
The number of cans of the caliper will also play a role in the pressure exerted on the liner to make the contact on the rotor as good as possible. To mount the calipers on your original chassis, TEI Racing provides caliper holders to position the calipers with your new braking system, providing the perfect setup for your car's braking system.
Go fast, stop fast. TEI Racing Grand Brake Kit gives you great braking power when you need it most. TEI Racing brake kits are available for both front and rear brakes, with rotor sizes ranging from 285mm to 405mm drilled or grooved or drilled and grooved, 2-6 piston forged integral aluminum caliper options, and custom colors. Stainless steel brake lines, brake pads and all hardware are used for direct bolt mounting without modification.
The TEI Racing Monoblock calipers are precision-machined from aircraft-quality billet aluminium and are fitted with heavy-duty aluminium pistons fitted with heat-resistant seals. These high performance calipers are able to take advantage of lightweight construction while significantly improving braking performance. The rotors in the TEI Racing Grand Brake kit have a two-piece design with drilled or slotted surfaces that help minimize wear and heat dissipation during the most extreme braking conditions.
| TEI Racing Rotor Size | Minimum Inch Wheel Size |
| 285*24mm | 15inch wheels |
| 300*24mm | 16inch wheels or above |
| 300*28mm | 17inch wheels or above |
| 330*28mm | 17inch wheels or above |
| 345*28mm | 18inch wheels or above |
| 355*32mm | 18inch wheels or above |
| 378*32mm | 19inch wheels or above |
| 405*34mm | 20inch wheels or above |
Installation Info
Installation Time
(approx) 4 Hours
Difficulty Level:
Mechanical expertise or professional installation required.
