Front 6 piston and rear 4 piston caliper BBK auto brake system For Li Auto L8 21 inch rim
The Li Auto L8 is a luxury mid-size crossover SUV by Chinese automobile manufacturer Li Xiang, and it is also the replacement for the Li Xiang One.The vehicle can be described as a range extended vehicle or as a PHEV. It has two electric motors: a 130-kilowatt (174 hp; 177 PS) motor in the front and a 200-kilowatt (268 hp; 272 PS) motor in the rear. It is also equipped with a front-mounted 1.5-litre turbocharged 4-cylinder petrol engine with a 65 litres (17.2 US gal; 14.3 imp gal) petrol tank capacity. The petrol engine is a range extender for the electric motors; it does not directly power the wheels.
Total power output is 330 kW (443 hp; 449 PS) and 620 N⋅m (457 lb⋅ft; 63.2 kg⋅m). The company claims a WLTC range of 700 km (430 mi), and an electric-only WLTC range of 168 km (104 mi) with the CLTC range being 210 km (130 mi). Charging to 80% takes 30 minutes with a fast charger. A full charge at 200V takes 6.5 hours. Battery capacity is 40.9 kWh (147 MJ).
It is an SUV, available with six seats in three rows. The interior has several screens sharing the same HUD and mini LED touchscreen in the steering wheel as the Li Auto L9, an additional dual 3K 15.7-inch central touchscreens, and the infotainment system runs on Android Automotive, powered by a dual of Qualcomm Snapdragon 8155 CPU processor with 24GB of RAM and 256GB of internal storage for the L8 Max and a single 8155 CPU processor with 12GB of RAM and 128GB of internal storage for the L8 Pro.
The L8 Max comes with the same AD MAX found in the Li L9, which means that the L8 Max is equipped with the same dual Nvidia Orin-X chips with 508TOPS. The L8 Max also uses the same sensor array consisting of a roof-mounted Hesai lidar, six 8MP cameras, two 5MP cameras, 12 ultrasonic radars, and a milliwave radar. The Li Xiang L8 Pro uses a system named AD Pro, which is a vision-only system without the roof-mounted lidar. The system uses a Horizon Robotics Journey 5 chip with 128 TOPS and sensor array consists of an 8MP front camera and five 2MP peripheral cameras along with four 2MP surround view cameras, 12 ultrasonic radars, and a milliwave radar. will be equipped with a Level 2 Autonomous Driving system.
The S series high performance version of the brake kit is suitable for fierce driving in daily streets, tracks, integrated structures, with ultra -high strength and lightweight design which is satisfied with the requirements of the brake performance of the spuer power car models.
The P-series street version of the brake kit is suitable for daily street use. It uses an EPB system. Without changing any components, it can retain the electronic parking function and enhance the powerful power.
Note: Due to the problems of structure and system matching, some models need to use transfer wires to connect original motor.
1 Full kit included
2 x Calipers
2 x Discs
2 x Brake Lines
4 x Brake Pads
2 x Adapters( Brackets)
2 x Rotor Hat
